Bel-Art, Scienceware, 371200112, Spinbar, Stirring Bar, Teflon, Polygon, 1-1/2"X3/8"

Bel-Art, Scienceware, 371200112, Spinbar, Stirring Bar, Teflon, Polygon, 1-1/2"X3/8" Reviews

Other Picture

Bel-Art, Scienceware, 371200112, Spinbar, Stirring Bar, Teflon, Polygon, 1-1/2"X3/8" Feature

• Teflon PTFE coated
• Polygonal surface for efficient stirring action

Bel-Art Spinbar Stirring Bar Teflon Po 371200112

Visit Store Now !!

Detail Products

Detail Reviews

Mar 31, 2011 12:41:07

Pipe Mixer, 316 Stainless Steel, 1/4 inch NPT(M), 12 elements

Pipe Mixer, 316 Stainless Steel, 1/4 inch NPT(M), 12 elements Reviews

Other Picture

Pipe Mixer, 316 Stainless Steel, 1/4 inch NPT(M), 12 elements Feature

• 316 Stainless Steel In-Line Pipe Mixers
• Part Number: AO-04669-07
• Package Quantity: EACH

science-lab-stirrers

Visit Store Now !!

Detail Products

Detail Reviews

Mar 30, 2011 16:35:03

Fisherbrand Octagonal Magnetic Stir Bar; Flat Surface; 0.5 in. Dia. (13mm); 1.5 in. L (38mm)

Fisherbrand Octagonal Magnetic Stir Bar; Flat Surface; 0.5 in. Dia. (13mm); 1.5 in. L (38mm) Reviews

Other Picture

Stir Bar, Magnetic; Fisherbrand; Octagonal; 1/2 in. dia.; 1-1/2 in. L; pivot rings; Alnico_V magnet encased in PTFE; flat surface

Visit Store Now !!

Detail Products

Detail Reviews

Mar 28, 2011 22:18:03

Lightnin (A-310) 316 SS high-efficiency axial flow impeller, 4.5" dia x 5/8" bore dia

Lightnin (A-310) 316 SS high-efficiency axial flow impeller, 4.5" dia x 5/8" bore dia Reviews

Other Picture

Lightnin (A-310) 316 SS high-efficiency axial flow impeller, 4.5" dia x 5/8" bore dia Feature

• High-Efficiency Axial Flow Impellers (Lightnin A-310)
• Bore dia: 0.625 in
• Material: Stainless steel
• Overall diameter: 4.5 in
• Brand: Lightnin
• Model: 808887PSP
• Type: Accessory
• Part Number: AO-50350-42
• Package Quantity: EACH

Designed to create 50% more mixing and a true axial flow pattern.

Visit Store Now !!

Detail Products

Detail Reviews

Mar 28, 2011 00:40:07

Square blade impeller; 4" dia

Square blade impeller; 4" dia Reviews

Other Picture

Square blade impeller; 4" dia Feature

• General-Purpose 316 Stainless Steel Shafts, Extension Rods and Sleeves, and Propellers
• Impeller size: 2 in square blade
• Shaft dia: 0.3125 in
• Shaft length: 17.75 in
• Shaft material: stainless steel
• Part Number: AO-50801-53
• Package Quantity: EACH

science-lab-stirrers

Visit Store Now !!

Detail Products

Detail Reviews

Mar 26, 2011 21:10:32

Corning 6795-210 120V/60Hz PC-210 Magnetic Stirrer with 4" Length x 5" Width Pyroceram Top

Corning 6795-210 120V/60Hz PC-210 Magnetic Stirrer with 4" Length x 5" Width Pyroceram Top Reviews

Other Picture

Corning 6795-210 120V/60Hz PC-210 Magnetic Stirrer with 4" Length x 5" Width Pyroceram Top Feature

• Two piece casting design deflects spills away from electronics and includes a built in mount for an optional support rod (Number 400084)
• Enclosed electronics design protects components - improves performance and prolongs product life
• 1 x 3/8 inch stir bar included with each stirrer
• 2 year warranty
• Includes a built in mount for an optional support rod (Number 400084).

Corning 4 x 5 Inch Top PC-210 Stirrer. Low profile, space-saving design. Exclusive closed-loop stirring control monitors; regulates stirring speed for aqueous, viscous, or semi-solid solutions. Stronger, larger magnet improves stir bar coupling and stirring capability. Durable Pyroceram Glass-Ceramic top. Dimensions (LxWxH): 4.4x5.8x7.3 inches. Top Size: 4 x 5 inches (10.2 x 12.7 cm). Weight: 2Kg (approx). Stir Rate: 60-1100 RPM. Amperage: 0.3. Power: 120V-60H. Watts: 33. Includes 1 x 3/8 inch stir bar. Designed for North American three-pronged plug and locations with similar requirements. Corning #: 6795-210.

Visit Store Now !!

Detail Products

Detail Reviews

Mar 25, 2011 03:41:04

Lightnin 316 SS laser designed high-flow impeller (Lightnin A-410), 3.9" dia x 5/16" bore dia

Lightnin 316 SS laser designed high-flow impeller (Lightnin A-410), 3.9" dia x 5/16" bore dia Reviews

Other Picture

Lightnin 316 SS laser designed high-flow impeller (Lightnin A-410), 3.9" dia x 5/16" bore dia Feature

• Laser Designed High-Flow Impeller (Lightnin A-410)
• Bore dia: 0.3125 in
• Material: Polypropylene
• Overall diameter: 3.9 in
• Brand: Lightnin
• Model: 271382PPL
• Type: Accessory
• Part Number: AO-04560-80
• Package Quantity: EACH

Choose from a variety of impeller designs; all are constructed of 316 stainless steel except high-flow impeller 04560-80, which is made of glass-filled polypropylene with 316 SS set screws. Laser desined high-flow impeller produces strong axial flow at very high flow efficiency. Ideal for transitional flow regime mixing. Made of glass-filled polypropylene with 316 SS set screws.

Visit Store Now !!

Detail Products

Detail Reviews

Mar 24, 2011 08:26:04

PVC static mixer without injection port; 1" dia

PVC static mixer without injection port; 1" dia Reviews

Other Picture

PVC static mixer without injection port; 1" dia Feature

• PVC Mixers Without Injection Port
• Flow range: 5 to 15 GPM
• Pressure loss: 0.75 to 6.7 psi
• Mixer length: 7 in
• No. of elements: 4
• Pipe size (" ID): 1
• Part Number: AO-04668-61
• Package Quantity: EACH

Instead of mixing fluids with a motorized mixer before pumping, you can mix fluids while you pump them through a pipe line. In-line mixers prevent overmixing and undermixing, and resist fouling in your pipes or tubes. They are virtually maintenance free and need no spare parts. In-line mixers provide efficient mixing and can withstand large pressure changes—up to 1500 psi with smallest sizes. Mixing elements in pipe and tube mixers are securely attached to the mixer walls, so internal pressure changes cannot collapse elements and stop flow. These mixers are designed for blending light-viscosity treatment chemicals into a water stream. Each mixer is constructed of schedule 80 PVC and has four fixed, solid PVC mixing elements. Maximum working pressure is 150 psi. Connections are 150 lb raised face flanged ends.Note: these mixers are designed for high flow rates. They use four elements instead of six to minimize pressure loss.

Visit Store Now !!

Detail Products

Detail Reviews

Mar 22, 2011 03:02:03

Corning* Slow-Speed Stirrer; No. of Positions: 4; Nominal Vol./Position: 1L; 26Lx 26W x 7cm H

Corning* Slow-Speed Stirrer; No. of Positions: 4; Nominal Vol./Position: 1L; 26Lx 26W x 7cm H Reviews

Other Picture

Stirrers, Slow-Speed; Corning; Electrical Requirements: 120V 60Hz; No. of Positions: 4; Nominal Volume per Position: 1L;Control Type: Integral Control; Operate at speeds from 10150rpm; (26Lx 26W x 7Hcm)

Visit Store Now !!

Detail Products

Detail Reviews

Mar 21, 2011 03:55:04

Lightnin 316 SS high-efficiency axial flow impeller (Lightnin A-310), 2.5" dia x 5/16" bore dia

Lightnin 316 SS high-efficiency axial flow impeller (Lightnin A-310), 2.5" dia x 5/16" bore dia Reviews

Other Picture

Lightnin 316 SS high-efficiency axial flow impeller (Lightnin A-310), 2.5" dia x 5/16" bore dia Feature

• High-Efficiency Axial Flow Impellers (Lightnin A-310)
• Bore dia: 0.3125 in
• Material: Stainless steel
• Overall diameter: 2.5 in
• Brand: Lightnin
• Model: 808955
• Type: Accessory
• Part Number: AO-04560-25
• Package Quantity: EACH

Choose from a variety of impeller designs; all are constructed of 316 stainless steel except high-flow impeller 04560-80, which is made of glass-filled polypropylene with 316 SS set screws. High-efficiency axial flow impellers have laser designed paddles to develop 50% more mixing action for high-flow, low-shear mixing.

Visit Store Now !!

Detail Products

Detail Reviews

Mar 20, 2011 04:52:04

Handlebar mixer; 5/8" dia x 30"L shaft, 4" dia three-blade propeller

Handlebar mixer; 5/8" dia x 30"L shaft, 4" dia three-blade propeller Reviews

Other Picture

Handlebar mixer; 5/8" dia x 30"L shaft, 4" dia three-blade propeller Feature

• Handlebar mixers
• Max speed (rpm): 2000
• Min speed (rpm): 100
• Max torque (in-oz): 1440
• Impeller size: 4" dia, 3-blade
• Motor (hp): 0.5
• Shaft dia: 5/8"
• Shaft length: 30"
• Shaft material: stainless steel
• Type: Specialty mixers
• Part Number: AO-50500-33
• Package Quantity: EACH

science-lab-stirrers

Visit Store Now !!

Detail Products

Detail Reviews

Mar 18, 2011 19:19:07

PVC Mixer with Injection Port, 3" Line size

PVC Mixer with Injection Port, 3" Line size Reviews

Other Picture

PVC Mixer with Injection Port, 3" Line size Feature

• PVC Mixers with Injection Port
• Flow range: 60 to 150 GPM
• Pressure loss: 0.9 to 5.7 psi
• Mixer length: 27"
• No. of elements: 4
• Injection port size: 3/4"
• Pipe size (" ID): 3"
• Type: PVC Mixer
• Part Number: AO-04668-68
• Package Quantity: EACH

In-line mixers are more convenient than most motorized mixers. Instead of mixing fluids with a motorized mixer before pumping, you can mix fluids while you pump them through a pipe line. In-line mixers prevent overmixing and undermixing, and resist fouling in your pipes or tubes. They are virtually maintenance free and need no spare parts. In-line mixers provide efficient mixing and can withstand large pressure changes—up to 1500 psi with smallest sizes. Mixing elements in pipe and tube mixers are securely attached to the mixer walls, so internal pressure changes cannot collapse elements and stop flow. These PVC in-line mixers have an injection port designed for blending light-viscosity chemicals into a water stream. Each mixer is constructed of schedule 80 PVC and has four

Visit Store Now !!

Detail Products

Detail Reviews

Mar 17, 2011 23:46:08

Pipe Mixer, Kynar schedule 80, 2" NPT(M), 12 elements

Pipe Mixer, Kynar schedule 80, 2" NPT(M), 12 elements Reviews

Other Picture

Pipe Mixer, Kynar schedule 80, 2" NPT(M), 12 elements Feature

• Kynar Schedule 80 In-Line Pipe Mixers
• NPT(M): 2"
• Mixer length: 31"
• No. of elements: 12
• Brand: Kynar
• Pipe size (" ID): 1.939
• Type: In-Line
• Part Number: AO-04669-44
• Package Quantity: EACH

science-lab-stirrers

Visit Store Now !!

Detail Products

Detail Reviews

Mar 17, 2011 02:41:03