Dynalon 302826 35mm x 9mm, Teflon Triangular Stir Bar (Pack Of 4)

Dynalon 302826 35mm x 9mm, Teflon Triangular Stir Bar (Pack Of 4) Reviews

Other Picture

Dynalon 302826 35mm x 9mm, Teflon Triangular Stir Bar (Pack Of 4) Feature

• Length: 35mm (1-3/8 inches)
• OD: 9mm (3/8 inch)
• Material: PTFE
• Uniquely designed in a triangular shape to give the best possible spinning action
• Contains a strong, permanent alloy magnet

This 35mm triangular stirring bar is designed to give the most efficient mixing of all stirring bars. The bar is uniquely designed in a triangular shape to give the best possible spinning action. Made of virgin PTFE with a strong, permanent alloy magnet. Length: 35mm (1-3/8 inches). OD: 9mm (3/8 inch). Material: PTFE. Dynalon® #: 302826.

Visit Store Now !!

Detail Products

Detail Reviews

Jun 30, 2011 20:02:03

10.5mm Chuck for Heidolph Mixers

10.5mm Chuck for Heidolph Mixers Reviews

Other Picture

10.5mm Chuck for Heidolph Mixers Feature

• Heidolph Laboratory Mixers and Accessories
• Part Number: AO-54400-05
• Package Quantity: EACH

This chuck is for use with Heidolph mixer models 54400-12, 54400-14, 54400-16, 54400-20, 54400-22, 54400-24, and 54400-30.

Visit Store Now !!

Detail Products

Detail Reviews

Jun 29, 2011 20:40:03

304 SS mixing shaft, 10 mm dia x 500 mm L

304 SS mixing shaft, 10 mm dia x 500 mm L Reviews

Other Picture

304 SS mixing shaft, 10 mm dia x 500 mm L Feature

• Mixing Shaft
• Type: Accessory
• Shaft dia: 10 mm
• Shaft length: 500 mm
• Material: Stainless steel
• Part Number: AO-04370-02
• Package Quantity: EACH

Mixing shaft for use with any 10 mm dia or adjustable 3/8" dia chuck. Measures 10 mm dia x 500 mm L. Use only with propellers listed at right.

Visit Store Now !!

Detail Products

Detail Reviews

Jun 28, 2011 15:09:04

Lightnin 316 SS axial flow impeller (Lightnin A-100), 2.7" dia x 5/8" bore dia

Lightnin 316 SS axial flow impeller (Lightnin A-100), 2.7" dia x 5/8" bore dia Reviews

Other Picture

Lightnin 316 SS axial flow impeller (Lightnin A-100), 2.7" dia x 5/8" bore dia Feature

• Axial Flow Impellers (Lightnin A-100)
• Type: Accessory
• Bore dia: 0.625 in
• Brand: Lightnin
• Overall diameter: 2.7 in
• Material: Stainless steel
• Part Number: AO-50350-00
• Package Quantity: EACH

Axial Flow Impellers (LIGHTNIN® A-100) with SUPERPITCH® design—1.5 pitch ratio for greater batch mixing capabilities.

Visit Store Now !!

Detail Products

Detail Reviews

Jun 27, 2011 19:45:04

Hanna Instruments HI 303N Two-Speed Magnetic Stirrer with Tachometer

Hanna Instruments HI 303N Two-Speed Magnetic Stirrer with Tachometer Reviews

Other Picture

Hanna Instruments HI 303N Two-Speed Magnetic Stirrer with Tachometer Feature

• Uses two separate speed ranges
• Precise stirring repeatability
• Can stir up to 2.15 liters of liquid

QC stations and labs must be able to repeat tests and processes. In order to do this, the specifications must be clear at all times. When stirring a solution, the RPMs are a very crucial factor. Without a tachometer, there is no way of knowing the exact RPMs and therefore no way of repeating the process. We solve this problem solve this problem by incorporating an LCD tachometer

Magnetic 2.5L two-speed stirrer with tachometer, stainless steel cover, 110/115V .This stirrer allows for precise stirring repeatability by using two separate speed ranges. In each range, the speed can be fine tuned for exacting accuracy. This assures maximum repeatability in experiments and processing for laboratory as well as production use. In addition to the tachometer and speed control, a limiter will assure that the maximum speed is never exceeded (Speedsafe). Often, a sample is removed from the stirrer before the speed has been reduced. This can occasionally cause the motor to accelerate until it destroys itself. HANNA stirrers incorporate a VCO device that will stop the motor from accelerating as soon as the load is removed.

Visit Store Now !!

Detail Products

Detail Reviews

Jun 26, 2011 16:50:04

Scilogex D-101200 Magnetic Teflon Autoclavable Round Stirring Bar With No Pivot Ring, 19 x 8mm

Scilogex D-101200 Magnetic Teflon Autoclavable Round Stirring Bar With No Pivot Ring, 19 x 8mm Reviews

Other Picture

Scilogex D-101200 Magnetic Teflon Autoclavable Round Stirring Bar With No Pivot Ring, 19 x 8mm Feature

• No pivot ring
• 19 x 8mm
• For use in any digital or analog stirrer
• Can be used instead of clamp and rod stirrer
• Autoclavable

Scilogex Magnetic Teflon Stirring Bar; Round; Pivot Ring. 19 x 8mm. Scilogex #: D-101200.

Visit Store Now !!

Detail Products

Detail Reviews

Jun 25, 2011 13:01:05

Lightnin LabMaster remote control mixer with universal clamp; 90-1600 rpm, 115 VAC

Lightnin LabMaster remote control mixer with universal clamp; 90-1600 rpm, 115 VAC Reviews

Other Picture

Lightnin LabMaster remote control mixer with universal clamp; 90-1600 rpm, 115 VAC Feature

• Lightnin Remote Control Mixers With Analog Speed Controller
• Each mixer includes an A-310 impeller for high-efficiency mixing
• Choose from three mounting styles
• Impeller size: 3.4 in
• Brand: Lightnin
• Min speed (rpm): 90
• Max speed (rpm): 1600
• Motor (hp): 0.07
• Max torque (in-oz): 42
• Part Number: AO-04561-50
• Package Quantity: EACH

LabMaster™ direct-drive mixers are excellent for pilot studies of chemical, food, and wastewater treatment processes. All mixers feature a fuse-protected TENV continuous-duty motor; operate on 115 VAC, 50/60 Hz; and have an on/off indicator light. We offer mixers with three types of mounting styles. The tube suspension mixers require the heavy-duty dual clamp 04560-24 (sold below). The universal clamp mixers mount directly to a ring stand or tank rim. Order mixers with Tri-Clamp® mounting flange to use with tanks with a sanitary quick-connect mixer port. These variable-speed mixers feature a remote speed controller connected to the mixer via a 5-ft cable that lets you position the controller safely away from splashing liquids. Choose either an analog controller (B) or digital controller © with 4-digit LEDdisplay. Through-type shaft and motor angle adjustment knob give you precise control of stirring angle and propeller depth. For information on mixers with Viton® V-ring seal or ANSI flange, call our Application Specialists. Also call our Application Specialists to order a tank with 4" sanitary quick-connect fittings.

Visit Store Now !!

Detail Products

Detail Reviews

Jun 24, 2011 11:33:03

Fisherbrand<special id="374"/> Round Stir Bar w/Removable Pivot Ring; PTFE; 0.5 dia. x 3 in. L

Fisherbrand Round Stir Bar w/Removable Pivot Ring; PTFE; 0.5 dia. x 3 in. L Reviews

Other Picture

Stirrer bars, accessories; Fisherbrand; Round; PTFE; With small removable pivot ring; Ring minimizes contact area of bar to vessel; Also reduces friction and marring of plastic containers; Dia. x L: 0.5 in. (12.7mm) x 3 in. (76mm)

Visit Store Now !!

Detail Products

Detail Reviews

Jun 22, 2011 17:15:03

Pipe Mixer, 316 stainless steel, 3/4" NPT(M), 12 elements

Pipe Mixer, 316 stainless steel, 3/4" NPT(M), 12 elements Reviews

Other Picture

Pipe Mixer, 316 stainless steel, 3/4" NPT(M), 12 elements Feature

• 316 Stainless Steel In-Line Pipe Mixers
• Mixer length: 13 in
• No. of elements: 12
• Pipe size (" ID): 0.82
• NPT(M): 0.75 in
• Part Number: AO-04669-20
• Package Quantity: EACH

science-lab-stirrers

Visit Store Now !!

Detail Products

Detail Reviews

Jun 21, 2011 17:21:23

Pipe Mixer, Kynar schedule 80, 1" NPT(M), 6 elements

Pipe Mixer, Kynar schedule 80, 1" NPT(M), 6 elements Reviews

Other Picture

Pipe Mixer, Kynar schedule 80, 1" NPT(M), 6 elements Feature

• Kynar Schedule 80 In-Line Pipe Mixers
• Mixer length: 8 in
• No. of elements: 6
• Pipe size (" ID): 1.05
• NPT(M): 1 in
• Brand: Kynar
• Part Number: AO-04669-32
• Package Quantity: EACH

science-lab-stirrers

Visit Store Now !!

Detail Products

Detail Reviews

Jun 20, 2011 14:18:05

<b>Air set</b> for use with air drive mixer; complete set includes regulator, filter, and lubricator

Air set for use with air drive mixer; complete set includes regulator, filter, and lubricator Reviews

Other Picture

Air set for use with air drive mixer; complete set includes regulator, filter, and lubricator Feature

• General Accessories and Replacement Items
• Type: Accessories
• Part Number: AO-50500-31
• Package Quantity: EACH

science-lab-stirrers

Visit Store Now !!

Detail Products

Detail Reviews

Jun 17, 2011 07:57:03

Dynalon 303465 1.5 x 15mm, Teflon Micro Stir Bar (Pack Of 4)

Dynalon 303465 1.5 x 15mm, Teflon Micro Stir Bar (Pack Of 4) Reviews

Other Picture

Dynalon 303465 1.5 x 15mm, Teflon Micro Stir Bar (Pack Of 4) Feature

• Length: 15mm (9/16 inch); OD: 1.5mm (1/16 inch)
• Material: Teflon® PTFE
• Description: micro
• Use for stirring test tubes, micro-beakers, and other small containers
• Features an Alnico V magnetic core

This 15mm Teflon® PTFE micro stir bar can be used for stirring test tubes, micro-beakers, and other small containers. The stir bar is covered in Teflon® PTFE white resin and features an Alnico V magnetic core which is one of the most powerful permanent magnet alloys available. Stir bar should not be stored in a random mass or dropped on a hard surface, especially steel. Stir bar should be stored in pairs to maintain magnetic strength. Length: 15mm (9/16 inch). OD: 1.5mm (1/16 inch). Description: Micro. Material: Teflon® PTFE. Dynalon® #: 303465.

Visit Store Now !!

Detail Products

Detail Reviews

Jun 16, 2011 09:11:03

Turbine Stirrer

Turbine Stirrer Reviews

Other Picture

Turbine Stirrer Feature

• IKA Mixer Accessories
• Get the most out of your IKA Mixer with these accessories
• Description: Turbine Stirrer
• Impeller size: 2.75 in (70 mm)
• Max speed (rpm): 800
• Shaft dia: 0.4 in (10 mm)
• Shaft length: 15.75 in (400 mm)
• Shaft material: 316 SS
• Part Number: AO-50703-37
• Package Quantity: EACH

Used for drawing the material to be mixed from above. Generates axial flow in the vessel. Minimum danger of injury when contact is made with vessel. Minimum shearing forces. Used at medium to high speeds.

Visit Store Now !!

Detail Products

Detail Reviews

Jun 15, 2011 04:23:09